Aledo sits west of Fort Worth on rolling ranch country, and the homes here are built for space: big new construction with vaulted great rooms, sprawling single-story ranches, and detached metal shops that sweat in the Texas heat without proper insulation. Most Aledo properties run ductwork and water lines through vented attics that hit 140 to 160 degrees on the long strings of 100-degree summer days we see in North Texas, and that uncontrolled heat drives cooling bills up fast.
Fort Worth Spray Foam Insulation has been serving Aledo (76008) and the surrounding Fort Worth area since 2012. We specialize in attic spray foam, closed-cell foam for metal buildings and barndominiums, crawl space insulation, and air sealing around rim joists and band joists. When a homeowner in Aledo calls us, it's usually because a summer electric bill has become unaffordable, a bonus room over the garage won't cool down, or a metal building or shop is sweating condensation onto equipment and inventory. We come out, assess what's actually happening, and explain the work honestly.
Spray Foam Insulation in Aledo (76008)
Aledo's building stock is split between newer brick two-stories built over the last twenty years and older ranch homes from the 1950s and 1960s. Nearly all of them sit on concrete slabs or pier-and-beam foundations with no basements, which means the ductwork and often the water lines run through a vented attic. In summer, that attic becomes a heat engine: outside air enters through soffit vents, the sun pounds the roof, and the temperature climbs to 140 to 160 degrees while your air conditioning system works against it from below. Spray foam insulation stops that heat transfer at the source by sealing the attic envelope and the ductwork inside it.
Metal buildings and barndominiums are common on Aledo's larger properties, and they present a different problem. Without closed-cell spray foam on the underside of the roof deck, condensation forms on the interior metal surface on cool mornings and humid afternoons. The moisture drips onto hay, equipment, vehicles or stored goods, and the building becomes unusable. Closed-cell foam is dense and vapor-impermeable, so it stops the condensation before it starts.
Aledo's older homes often have crawl spaces under pier-and-beam construction, and many have original insulation that's compressed, damp or fouled by rodents. We remove the old material, dry and seal the crawl space foundation, and install new closed-cell or open-cell foam to condition the space and protect the band joists and rim joists from the temperature swings that crack and warp wood.
Since 2012, our team has installed spray foam insulation in attics, walls, crawl spaces, metal buildings and garages across Fort Worth and the surrounding area. We know the local building code, the permitting process, and what works in North Texas heat and humidity.
Our services in Aledo
- Attic Spray Foam Insulation in Aledo · Open-cell foam on the roof deck turns a 150°F Fort Worth attic into conditioned…
- Closed Cell Spray Foam Insulation in Aledo · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
- Open Cell Spray Foam Insulation in Aledo · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
- Wall & Injection Foam Insulation in Aledo · Injection foam fills closed walls through small drilled ports, no demolition.
- Crawl Space Spray Foam Insulation in Aledo · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
- Rim Joist & Band Joist Spray Foam in Aledo · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
- Garage Spray Foam Insulation in Aledo · Garage ceilings under bonus rooms and walls shared with the house are…
- Metal Building & Barndominium Spray Foam in Aledo · Closed-cell foam is the insulation that stops a Texas metal building from…
- Commercial & New Construction Spray Foam in Aledo · Warehouses; offices; churches and production builders served on schedule.
- Insulation Removal in Aledo · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
- Insulation Replacement & Re-Insulation in Aledo · The full reset: old material removed; gaps air-sealed…
- Air Sealing in Aledo · Top plates; can lights; chases and attic hatches leak more cooled air than most…
How a Job Works in Aledo
We start with a free on-site assessment. You describe the problem: high cooling bills, a cold room, condensation in the shop, or old insulation that needs to come out. We walk the attic, crawl space or metal building, measure the area, note the existing insulation and any moisture or damage, and explain what spray foam will do and what it will cost. We provide a written estimate that includes the R-value, the foam thickness in inches, the area in square feet or board feet, and the price. No guesswork.
Before we spray, we prepare the space. If old insulation has to come out, we remove and haul it away. If there's moisture on the substrate, we dry it first or we walk away. We set up mechanical ventilation, because spray foam releases fumes during cure and the space needs to breathe. We mask off any areas that shouldn't be sprayed, and we confirm the re-entry window with you: typically twenty-four to forty-eight hours before the space is safe for occupants and pets.
We spray the foam in controlled passes, applying the correct thickness and ratio with each pass to ensure a solid, fully-cured installation. In a tight Aledo attic or a crawl space with low headroom, that means working methodically and leaving room for the foam to expand and cure properly. Once the foam has set, we trim any excess and clean up the workspace. Your property leaves clean.
Pricing for spray foam insulation in Aledo depends on several factors: the area to be covered, the R-value and thickness you need, whether you choose open-cell or closed-cell foam, and whether old insulation has to be removed first. A typical attic top-up in an Aledo home might run from $1.50 per square foot for open-cell foam to $1.20 per board foot for closed-cell. A crawl space insulation job typically starts around $2,500. Wall injection foam for a retrofit runs from $2 per square foot. Removing and replacing old, damaged insulation runs from $2,800. Metal building and barndominium foam starts at $1.75 per square foot. Every job is different, and the only way to know what your property will cost is to have us out for a free estimate. Call us at (817) 607-8986 with details about what you want to insulate, and we'll give you a ballpark figure and a time to visit.
✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Aledo and nearby areas.
