Attic Spray Foam Insulation Arlington, TX 76010 | Fort Worth Spray Foam Insulation

Spray Foam Insulation in Arlington, TX (76010) · Local Professionals

Fort Worth Spray Foam Insulation · Fast response in Arlington and the Fort Worth area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Arlington's 1970s and 1980s ranch homes and two-stories were built solid, but their original attic insulation has flattened after four decades of 140 to 160 degree summer heat, and spring hail keeps roofs in steady replacement mode. If your home sits in the 76010 ZIP code, you're living in one of North Texas's most active spray foam markets, where attic temperatures spike fast and energy bills follow.

Fort Worth Spray Foam Insulation has been serving Arlington and the surrounding Fort Worth area since 2012. We work on the homes that need it most: ranches with empty wall cavities, attics where the original fill has compressed to nothing, crawl spaces under pier-and-beam foundations, and the rim and band joists where conditioned air leaks straight into the unconditioned space below. When your summer cooling bill becomes unaffordable, or a bonus room over the garage never cools no matter what the thermostat says, we show up with a free on-site assessment and an honest estimate with R-value and thickness spelled out.

Spray Foam Insulation in Arlington (76010)

Arlington's housing stock tells the story. The ranches and two-stories built from the 1970s through the 1990s sit on concrete slabs or on pier-and-beam foundations with open crawl spaces underneath. Above them, the ductwork and water lines run through vented attics that hit 140 to 160 degrees on the long strings of 100-degree summer days North Texas gets from June through September. The original attic insulation, whether blown-in fiberglass or cellulose, has settled and compacted over decades. Walls built without cavity insulation stay cold in winter and hot in summer. Crawl spaces sweat with humidity in spring and summer, and condensation collects on the underside of rim joists where the house meets the foundation.

Spray foam insulation fixes these problems directly. Closed-cell foam seals the rim joist and band joist, stops the crawl space from pulling moisture into the house, and fills wall cavities so they hold temperature year-round. Open-cell foam in the attic adds R-value where the original fill has failed, and because it is vapor-permeable, it lets the attic breathe the way your home's design expects it to. We have been doing this work in Arlington since 2012. We know the building code that applies at your address, the local permit process, and the specific failure modes that hit 1970s and 1980s construction hardest.

Our services in Arlington

Attic Spray Foam Insulation in Arlington · Open-cell foam on the roof deck turns a 150°F Fort Worth attic into conditioned…
Closed Cell Spray Foam Insulation in Arlington · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Arlington · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Arlington · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Arlington · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Arlington · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Arlington · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Arlington · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Arlington · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Arlington · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Arlington · The full reset: old material removed; gaps air-sealed…
Air Sealing in Arlington · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Arlington

We start with a free on-site assessment. You tell us what you are seeing: a summer cooling bill that has become unaffordable, a room that never reaches temperature, condensation on windows or on ductwork in the attic, or insulation that has been compressed or fouled by rodents. We walk the attic, crawl space or walls with you, measure the area, and explain what needs to happen and why. We send a written estimate with R-value and thickness specified, so you know exactly what you are paying for before any work begins.

On the day of the job, our team arrives with the equipment and the material. If old insulation has to come out first, we remove and haul it. If the substrate is wet or contaminated, we do not spray: we fix the moisture first or we walk away. Once the area is prepped and protected, we spray the foam to the thickness and R-value in your estimate. During cure, we run mechanical ventilation and keep the space unoccupied. The re-entry window is twenty-four to forty-eight hours, depending on conditions. We leave your property clean and do a final walkthrough with you so you can see the work.

Pricing for spray foam insulation in Arlington depends on the area to cover, the R-value and thickness you need, whether you choose open-cell or closed-cell foam, and what has to be removed or prepped first. A typical attic top-up in a 1970s or 1980s ranch runs from $1.50 per square foot for open-cell foam, or from $1.20 per board foot for closed-cell. Wall injection foam starts at $2 per square foot. A crawl space encapsulation with closed-cell foam runs from $2,500 and up, depending on square footage and moisture conditions. If old insulation has to come out, add $950 and up for removal. The most honest way to get a real number is a free on-site estimate. Call us at (817) 607-8986 or tell us about your home, and we will walk through the job with you and give you a price you can count on.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Arlington and nearby areas.

My Arlington home was built in the 1980s and sits on a concrete slab with a crawl space underneath. The crawl space is damp, and I can see moisture on the rim joist. What does spray foam do here?

A damp crawl space under a slab foundation is one of the most common problems we see in Arlington. The crawl space pulls moisture into the house through the rim joist and band joist, and that moisture travels into the walls and the attic above. Closed-cell spray foam seals the rim and band joist completely, stops the moisture intrusion, and protects the framing from rot. We also spray the underside of the rim joist to create an air seal. If there is standing water or active seepage in the crawl space, we do not spray: the moisture has to be addressed first, either with a sump pump, better grading, or both. Once the crawl space is dry, the foam goes in and stays effective for the life of the house.

I had a spray foam job done two years ago and the smell never went away. What went wrong?

A lingering smell after spray foam is almost always a sign of incomplete cure or improper installation. The foam needs mechanical ventilation during cure, controlled drum temperature, the correct mix ratio, and the right thickness per pass. If the installer promised immediate re-entry, skipped ventilation, or sprayed in cold weather without heating the substrate, the foam does not cure properly and the smell persists. When you are getting estimates, ask any installer whether they will run mechanical ventilation during cure and how long the re-entry window is. We ventilate every job and specify a twenty-four to forty-eight hour re-entry window. If you are dealing with a failed job, call us at (817) 607-8986 and we will assess what happened and talk through your options.

What does it cost to spray foam an attic in Arlington?

Attic spray foam in Arlington typically runs from $1.50 per square foot for open-cell foam, or from $1.20 per board foot for closed-cell. A 1,500 square foot attic with open-cell foam would run roughly $2,250 to $2,500, depending on R-value, access, and whether old insulation has to come out first. Closed-cell is denser and more expensive per board foot, but covers more area and gives you a higher R-value per inch. The best way to know is a free estimate. Call (817) 607-8986 and we will measure your attic and price it for you.

Who checks the R-value and makes sure the foam meets code in Arlington?

The City of Arlington's building official sets the energy code and the R-value requirements that apply to your home. If you need a permit for your insulation work, the city will inspect the finished job to confirm it meets code. The ignition barrier and thermal barrier rules are also set by the local code, and the fifteen-minute thermal barrier is the rule most installers get wrong. When we give you an estimate, we specify the R-value and thickness required at your address, and we help you understand what the local code requires. For specific questions about your permit or inspection, the City of Arlington website has the details, or you can call the building department directly.

Can we stay in the house while you spray foam the attic?

Yes, but with a re-entry window. During the spray and cure process, we run mechanical ventilation and keep the attic sealed. The smell and the off-gassing are contained, and the re-entry window is twenty-four to forty-eight hours. You can be in the house, but not in the attic or in a bonus room directly under it until that window closes. If you have an occupied bonus room over the garage or a second-floor bedroom directly under the attic, let us know during the estimate and we will coordinate the timing and the ventilation to minimize disruption. If you are in a master-planned community in Arlington, check your HOA rules for any exterior work restrictions, though most HOAs do not touch attic insulation.

Is your crew fully insured?

Yes. We carry general liability and workers' compensation insurance. Before any work begins, we can provide proof of insurance on request. Insurance protects you and your property while we work.

Summer in Arlington is brutal, and my cooling bills are out of control. Is now the right time to spray foam the attic, or should I wait until fall?

Spring and fall are the best times to spray foam because the temperatures are moderate and the substrate cures properly. Summer heat in Arlington can slow cure time, and winter cold can prevent cure altogether. If your cooling bills are unaffordable right now, the root cause is almost always a failed attic seal or compressed insulation, and the sooner you fix it, the sooner your bills drop. We can schedule you for a fall job while you are still paying high bills in summer, or if you need the work done immediately, we can spray in summer with proper ventilation and extended cure time. Call (817) 607-8986 and we will talk through the timing with you.