Attic Spray Foam Insulation Bedford, TX 76021 | Fort Worth Spray Foam Insulation

Spray Foam Insulation in Bedford, TX (76021) · Local Professionals

Fort Worth Spray Foam Insulation · Fast response in Bedford and the Fort Worth area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Bedford, 76021, is home to solid brick ranches and mid-century homes built in the 1950s and 1960s that sit on concrete slabs with vented attics running the full length of the roof. Your attic hits 140 to 160 degrees on a hundred-degree North Texas summer day, and that heat pulls cool air straight out of your living space through every gap and soft spot in the insulation.

Fort Worth Spray Foam Insulation has been serving Bedford and the surrounding Fort Worth area since 2012. We know the homes here, the way they're built, and why a summer electricity bill can spiral out of control when the original attic insulation has settled, compressed, or gotten wet. Our team handles the insulation resets that Bedford's 1970s and 1980s housing stock is due for after decades of hail seasons and North Texas weather.

Spray Foam Insulation in Bedford (76021)

Bedford's brick ranches and split-level homes were built with vented attics and empty wall cavities. The ductwork and water lines run through that attic, and when the original blown-in insulation settles or gets damp from a roof leak or a winter storm, the whole system loses efficiency. Condensation forms on the underside of the metal roof deck, and your air conditioning runs all day and all night to keep up. Closed-cell spray foam seals that attic tight, stops the condensation, and brings your cooling load back to reality. For homes with damp or rodent-fouled insulation, we remove it first, inspect the substrate, and spray a clean, controlled installation that will last.

We work on attics, crawl spaces, rim and band joists, closed walls, and garage conversions across Bedford and the Fort Worth area. Every job comes with a written estimate that names the R-value and thickness we're installing, so you know exactly what you're paying for.

Our services in Bedford

Attic Spray Foam Insulation in Bedford · Open-cell foam on the roof deck turns a 150°F Fort Worth attic into conditioned…
Closed Cell Spray Foam Insulation in Bedford · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Bedford · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Bedford · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Bedford · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Bedford · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Bedford · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Bedford · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Bedford · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Bedford · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Bedford · The full reset: old material removed; gaps air-sealed…
Air Sealing in Bedford · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Bedford

We start with a free on-site assessment. Our team walks your attic, checks the existing insulation, looks for moisture or damage, and talks through your comfort issues and your budget. If the old insulation has to come out, we price that removal upfront and explain why. If it's sound and we're topping it up, we say so and recommend the simpler option.

On the day of the spray, we set up mechanical ventilation in the attic to manage fumes during application. Spray foam releases VOCs as it cures, and we make sure the space is properly ventilated. We apply the foam in controlled passes, hitting the manufacturer's ratio and drum temperature every time. Once we're done, we leave the attic ventilated and give you a re-entry window of 24 to 48 hours before the space is safe to occupy normally. We clean up after ourselves and walk you through the finished work.

If you're living in the house during the job, we coordinate timing so the work happens when you can open windows and stay out of the treated space for the cure period.

Attic spray foam in Bedford typically runs from $1.50 per square foot for open-cell foam on top of existing insulation, up to $2.00 or more per square foot for closed-cell work or when old insulation has to be removed first. A 1,500-square-foot attic removal and closed-cell spray usually lands between $3,500 and $5,500, depending on access, thickness, and R-value. Wall injection foam for a closed cavity runs around $2.00 per square foot. Rim and band joist sealing starts at $650 for a smaller home. The main cost drivers are the area to cover, the R-value and thickness you need, whether you're spraying open or closed cell, and how much old insulation has to come out before we start. We'll give you a firm written estimate with R-value and thickness spelled out. Call us at (817) 607-8986 for a free estimate on your Bedford home.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Bedford and nearby areas.

I live in one of the brick ranches near Harwood Park in Bedford. The back bedroom never cools, and the attic insulation is original from the 1960s. What's the best fix?

Original blown-in insulation from the 1960s has almost certainly settled and compressed. A back bedroom that won't cool is usually a sign that the attic above it has thin or missing insulation, or that air is leaking from the conditioned space into the attic. Spray foam seals the attic tight and brings even heat back to a level the air conditioning can handle. We'll inspect the attic first, remove the old insulation if it's compressed or damp, and spray closed-cell foam to the R-value your home needs. That's a permanent fix.

Our attic smells musty and there's condensation dripping off the roof deck in winter. Is spray foam the answer, or do we have a roof leak?

Condensation on the underside of a metal roof deck in winter usually means warm, moist air from the living space is leaking into the attic and hitting the cold deck. That's an air sealing and insulation problem, not a roof leak. We'll inspect for active roof leaks or standing water first. If the attic is dry but the condensation is there, we spray closed-cell foam to seal the air leaks and insulate the deck. The foam stops the warm air from reaching the cold surface. If there IS a roof leak or standing water, we walk away and refer you to a roofer. We don't spray over wet substrate.

How much does it cost to spray foam an attic in Bedford, and what affects the price?

Attic spray foam in Bedford runs from $1.50 to $2.50 per square foot, depending on whether you're using open-cell or closed-cell foam, how thick the layer needs to be, and whether old insulation has to be removed first. A typical 1,500-square-foot attic with removal and closed-cell spray runs $3,500 to $5,500. The main cost factors are the area, the R-value and thickness specified in the estimate, the type of foam, and any insulation removal needed before we start. Call (817) 607-8986 for a free estimate tailored to your home.

Who decides what R-value and thickness I need in my Bedford attic, and how do I know the job meets code?

The energy code and building code in force at your address set the minimum R-value for attic insulation. The building official and the local code enforcement department in Bedford enforce it. Every estimate we write names the R-value and thickness, so you know what you're getting and what the code requires. Check the City of Bedford website or call the building department to confirm what applies to your home. We follow the code that's in force at your address. The ignition barrier and thermal barrier rules also come from the energy and building code, and those are set at the local level, not by us.

We're planning spray foam work in our Bedford home. Can we live here while the work is happening, and how long does the smell last?

Yes, you can live in the home during the spray, but you'll need to stay out of the attic and any treated space for 24 to 48 hours while the foam cures. We run mechanical ventilation during the spray to manage fumes, and we'll tell you exactly when it's safe to re-enter. The smell fades as the foam cures. If you have an HOA or an issue with neighboring properties, let us know upfront so we can coordinate timing and make sure everyone is comfortable with the work schedule.

Are you insured for spray foam work at my Bedford property?

Yes, we are fully insured with general liability and workers' compensation coverage. Our team carries the insurance your home and your property require. When you get an estimate from any spray foam contractor, ask to see proof of current insurance and verify it with your homeowner's insurance agent if you want to. We're happy to provide that documentation.

Summer cooling bills in my Bedford home are out of control. Is now the time to spray foam the attic, or should I wait until fall?

Summer is actually the peak season for spray foam work in Bedford. Your attic is at its hottest, the air leaks are at their worst, and your cooling bills are at their peak. That's when the payoff is most obvious. We work year-round, but summer is when you'll feel the difference fastest. If your attic insulation is original or damp, a summer spray foam job will bring your bills down before the hottest part of the season hits. Call (817) 607-8986 to schedule an assessment.