Attic Spray Foam Insulation Burleson, TX 76028 | Fort Worth Spray Foam Insulation

Spray Foam Insulation in Burleson, TX (76028) · Local Professionals

Fort Worth Spray Foam Insulation · Fast response in Burleson and the Fort Worth area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Burleson's mix of newer subdivisions and established neighborhoods sits on the rolling prairie between Fort Worth and Johnson County, where brick two-stories with vaulted great rooms stand beside older ranches and acreage with metal buildings and shops. Almost every home in 76028 sits on a concrete slab or pier-and-beam foundation with no basement, and above them all runs a vented attic where ductwork and water lines bake through 100-degree summer days that push attic temperatures to 140-160 degrees Fahrenheit.

Homeowners in Burleson call Fort Worth Spray Foam Insulation because spray foam stops the heat leak that air conditioning alone cannot fix, seals the rim joist and band board where older pier-and-beam homes bleed cold in winter, and stops condensation from dripping off metal building roof decks when humid air hits cold steel. We have served Burleson and the surrounding Fort Worth area since 2012 with crews who know the local building stock, the permitting process, and how to leave a property clean.

Spray Foam Insulation in Burleson (76028)

Burleson's building stock tells the story of North Texas expansion. The older neighborhoods hold 1950s-70s ranches with red or cream brick veneer over empty wall cavities and attic insulation that has settled flat or been disturbed by roof work. The newer subdivisions bring 1990s-2020s brick two-stories with bonus rooms over garages and vaulted great rooms that never cool evenly because the foam and air sealing that should be there was never installed. Beyond the city limits, Johnson County acreage holds barndominiums and metal shops where condensation beads on the underside of the roof deck every humid morning because closed-cell foam has never been sprayed.

All of these buildings share the same problem: a vented attic that runs hot in summer and loses heat in winter, closed walls with no cavity insulation, and rim joists and band boards that let outside air leak straight into the conditioned space. Spray foam fixes all three. We have been doing this work in Burleson and across the Fort Worth area for over a decade. Our team is fully insured, and we show up with a written estimate that names the R-value and thickness we are going to spray so you know exactly what you are paying for.

Our services in Burleson

Attic Spray Foam Insulation in Burleson · Open-cell foam on the roof deck turns a 150°F Fort Worth attic into conditioned…
Closed Cell Spray Foam Insulation in Burleson · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Burleson · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Burleson · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Burleson · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Burleson · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Burleson · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Burleson · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Burleson · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Burleson · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Burleson · The full reset: old material removed; gaps air-sealed…
Air Sealing in Burleson · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Burleson

The work starts with a free on-site assessment. We walk your attic, crawl space, garage, or metal building with you, take measurements, identify any insulation that has to come out first (damp, compressed, rodent-fouled, or just in the way), and photograph what we see. We come back with a written estimate that spells out the R-value and thickness we propose to spray, the area in square feet or board feet, and the price. No surprises.

On the day of the work, our crew sets up mechanical ventilation to keep the space fresh during and after the spray. We mask off areas that should not be sprayed, confirm the substrate is clean and dry (or we walk away and tell you what has to be fixed first), and spray the foam to the thickness and coverage the estimate calls for. If it is an occupied home, we let you know the re-entry window, typically twenty-four to forty-eight hours depending on conditions and foam type. Tight attic access, ductwork in the way, or insulation that has to come out first are all factored into the schedule and the price.

When we are done, we clean up. Leftover materials, protective coverings, and debris leave your property. You get a final walkthrough so you see what was done and where.

Spray foam pricing in Burleson depends on what you are doing and what has to happen first. An attic top-up on a home with existing insulation that is sound runs from $1.50 per square foot. A crawl space that needs to be sealed and insulated starts around $2,500 for a typical residential space. Rim joist and band board sealing on a pier-and-beam foundation runs from $650. A garage conversion or bonus room that was never insulated might be $1,200 to start. If old insulation has to come out first (removal runs from $950), that cost adds to the job. Wall injection foam for a closed cavity runs from $2 per square foot. Open cell foam costs less per board foot than closed cell, but closed cell is what you need in a crawl space or under a metal building roof where moisture is the enemy. The key variables are the square footage or board footage to cover, the R-value and thickness specified, whether you are using open or closed cell, and whether any existing insulation has to be removed and hauled away. Call us at (817) 607-8986 for a free estimate. We will tell you what the job actually costs once we have seen it.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Burleson and nearby areas.

I live in one of the newer subdivisions in Burleson with a bonus room over the garage that never cools down. What is going on?

The bonus room is over an unconditioned garage, and the floor above it has no insulation or air sealing. Hot air from the garage rises through gaps in the rim joist, around ductwork, and through any penetration in the floor, and the air conditioning in the room above cannot keep up. Spray foam on the rim joist and band board, and closed-cell foam under the floor deck or in the cavity above the garage ceiling, stops that heat leak. It is one of the most common comfort problems we solve in Burleson's newer homes.

My crawl space is damp and I can smell it. Can you just spray foam under there and seal it up?

Not yet. We have to fix the moisture first, or we walk away. A damp crawl space needs the source identified: standing water, a burst line, a roof leak draining into it, or just high humidity on a pier-and-beam foundation with no vapor barrier. Once the water is gone and the space is dry, closed-cell foam is the right answer because it is a vapor barrier itself and it will not absorb moisture. Call us at (817) 607-8986 and describe what you are seeing. We will tell you what has to happen before the foam goes in.

How much does it cost to spray foam an attic in Burleson?

Attic foam starts at $1.50 per square foot, but the actual price depends on the size of the attic, the R-value you want to hit, whether you are topping up existing insulation or starting from scratch, and what old insulation has to come out first. A typical attic in a Burleson two-story might run $3,000 to $6,000 depending on square footage and what is already there. Call (817) 607-8986 with your address and we will give you a real number.

Who decides what R-value and thickness I need, and how does the city inspect it?

The energy and building code in force at your address sets the minimum R-value, and the building official enforces it. In Burleson, that is the local building department. The code also governs the ignition barrier and thermal barrier on the foam itself, and that is where most general contractors get it wrong. We follow the code that applies to your address. Check the City of Burleson website at https://www.burlesontx.com for permit requirements and the building official's contact information before any work starts. We help you navigate what applies at your property.

If you spray foam in my attic, how long before I can go back up there and how long will the smell last?

We set up mechanical ventilation during and after the spray to keep the air moving. The re-entry window is typically twenty-four to forty-eight hours depending on the foam type, temperature, and humidity. Open cell cures faster than closed cell. The smell fades as the foam cures. In an occupied home, we schedule the work so the attic is ventilated and the smell is gone before you need to go up there. We will tell you the exact re-entry window when we schedule the job.

Are you insured for this work?

Yes. We are fully insured with general liability and workers' compensation coverage. Before any contractor starts work at your Burleson property, ask to see proof of insurance and confirm the coverage with the insurance company. That goes for us and for anyone else you hire.

Summer cooling bills in Burleson are brutal. When should I have spray foam done, and will it really help?

Summer is peak season for this work because the heat leak is real and homeowners feel it on their electric bill every month. The problem is a vented attic that runs 140-160 degrees while your air conditioning tries to cool the home below. Spray foam stops that heat from coming through the ceiling, through the rim joist, and through any ductwork that runs through the attic. A typical attic that is properly sealed and insulated can reduce cooling costs by 15 to 40 percent depending on the home's age, orientation, and how much was already there. We do not promise a number, but we see the difference on bills. If you want the work done before peak summer heat hits, call us now at (817) 607-8986. We schedule jobs year-round, but spring and early summer fill up fast.