Attic Spray Foam Insulation Grapevine, TX 76051 | Fort Worth Spray Foam Insulation

Spray Foam Insulation in Grapevine, TX (76051) · Local Professionals

Fort Worth Spray Foam Insulation · Fast response in Grapevine and the Fort Worth area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Grapevine's mix of historic Main Street cottages and sprawling 1980s-90s subdivisions near the airport means two very different insulation challenges under one Texas sky, and we've been solving both since 2012.

Whether you're heating or cooling a Craftsman bungalow on pier-and-beam or a brick two-story with a vaulted great room over an uninsulated wall cavity, the problem is the same: ductwork and water lines running through a vented attic that hits 140 to 160 degrees on a 100-degree summer day, and no way to stop the heat or the humidity without spray foam and air sealing. That's why homeowners in Grapevine (76051) and across the Fort Worth area call our team.

Spray Foam Insulation in Grapevine (76051)

Grapevine sits on the rolling Grand Prairie with expansive clay soils, and almost every home is built on a concrete slab or raised on a pier-and-beam foundation with an open crawl space underneath. Above them, the attic is vented and uninsulated, or filled with compressed fiberglass that's settled, absorbed moisture, or been fouled by rodents. The ductwork that cools your house runs through that hot, humid space, losing energy every foot of the way. In summer, your electricity bill climbs. In winter, a cold snap or a burst water line reminds you that vented attics are a liability in North Texas.

Closed-cell spray foam stops both problems. It seals the attic envelope, turns the underside of the roof deck into a conditioned space, and cuts the temperature swing that costs you money and comfort. Open-cell foam works for wall cavities and rim joists where the goal is air sealing and cost control. Wall injection foam retrofits the empty cavities in 1950s-70s brick ranches without tearing into the exterior. Crawl spaces under older pier-and-beam homes need foam and air sealing to stop moisture and heat loss through the rim and band joists. We've been installing spray foam in Grapevine and across the Fort Worth area since 2012, and we know the building stock, the code, and what actually works.

Our services in Grapevine

Attic Spray Foam Insulation in Grapevine · Open-cell foam on the roof deck turns a 150°F Fort Worth attic into conditioned…
Closed Cell Spray Foam Insulation in Grapevine · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Grapevine · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Grapevine · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Grapevine · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Grapevine · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Grapevine · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Grapevine · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Grapevine · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Grapevine · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Grapevine · The full reset: old material removed; gaps air-sealed…
Air Sealing in Grapevine · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Grapevine

We start with a free on-site assessment. We walk your attic, crawl space, or wall cavities and measure what needs to be sprayed. We explain the difference between open and closed cell, the R-value and thickness you need to meet code, and the cost to get there. We give you a written estimate with the R-value and thickness specified, so you know exactly what you're paying for. No surprises.

On the day of the work, we bring our crew and our equipment. If insulation has to come out first, we remove it and haul it away. If there's moisture or contamination, we tell you before we spray anything. We set up mechanical ventilation and spray the foam to the thickness we promised. Spray foam needs twenty-four to forty-eight hours to cure fully, and we'll tell you when the space is safe to re-enter. If you're living in the house, we work around your schedule and make sure you have the air and ventilation you need during the cure window.

When we're done, we clean up. We leave your property the way we found it, minus the insulation gaps and the energy waste.

Pricing depends on what you're doing. A typical attic foam job in Grapevine runs from $1.50 per square foot for open-cell foam to $1.20 per board foot for closed-cell, depending on the thickness and R-value the code requires at your address. Wall injection foam for a 1960s brick ranch runs around $2 per square foot. A crawl space rim joist and band joist job starts at $650. Insulation removal, if you need it, starts at $950. A full crawl space encapsulation with closed-cell foam starts at $2,500. The real cost factors are the area you're covering, the thickness and R-value specified, whether you're using open or closed cell, what has to be removed first, and how easy or tight the access is. We'll give you a straight answer on the phone at (817) 607-8986, and a detailed written estimate on site before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Grapevine and nearby areas.

I live in one of the older homes near Main Street on a pier-and-beam foundation. Do I really need spray foam in the crawl space?

Yes. A pier-and-beam crawl space is open to the outside air, and in North Texas that means hot, humid air in summer and cold air in winter. The rim and band joists that run around the perimeter are the thermal and moisture boundary between your living space and the unconditioned crawl space below. Spray foam seals those joists and stops heat loss and moisture infiltration. In an older Craftsman or Tudor, it's often the single biggest energy and comfort improvement you can make. We'll assess your crawl space and tell you what's worth doing.

My bonus room over the garage never cools properly, and I see condensation on the ductwork in the attic. What's happening?

Condensation on ductwork means humid air is leaking into the attic and cooling on the cold metal. That's a sign that your attic is not sealed and not insulated. The air is coming up through the walls, through rim joists, or around the ductwork itself. The bonus room doesn't cool because the ductwork is losing capacity to that unconditioned attic space. Spray foam seals the rim joists and the top of the walls, and closed-cell foam on the roof deck turns the attic into conditioned space. Before we spray anything, we have to fix the moisture source. If there's a roof leak or standing water, we walk away. We fix the moisture first or we don't spray. Call us at (817) 607-8986 for a free assessment.

What does spray foam insulation actually cost for an attic in Grapevine?

An attic foam job in Grapevine typically runs $1.50 per square foot for open-cell foam and $1.20 per board foot for closed-cell, but the real cost depends on how many square feet you're covering, the R-value and thickness the code requires, and whether you have old insulation that has to come out first. A 1,500-square-foot attic with open-cell foam and no removal might run $2,000 to $2,500. Closed-cell runs higher but gives you better moisture control and a higher R-value per inch. We'll measure your space and give you a firm written estimate at (817) 607-8986.

Who sets the R-value and thickness requirements for spray foam in Grapevine, and how do I know the job is done right?

The energy code and building code in force at your address, enforced by the City of Grapevine building official, set the R-value and thickness you need. The code also specifies the ignition barrier and thermal barrier that spray foam has to have. Most installers get the thermal barrier wrong, and naming it correctly is itself the expertise signal. Before any work starts, ask your contractor for a written estimate that specifies the R-value, the thickness per pass, and the ignition and thermal barrier product. When the job is done, the building official inspects it. For permit and code questions specific to your address in Grapevine, contact the City of Grapevine website at https://www.grapevinetexas.gov or call the building department directly.

Can I stay in my house while the spray foam is being sprayed and curing?

Yes, but with conditions. During the spray, we run mechanical ventilation to move the fumes out of the house. You should leave the immediate work area and keep windows open in other parts of the home. Spray foam needs twenty-four to forty-eight hours to cure fully, and we'll give you a re-entry window before you go back into the sprayed space. If you have young children, elderly family members, or anyone with respiratory sensitivity, plan to be away or in a different part of the house during the cure window. We'll tell you exactly what to expect.

Are you fully insured for spray foam work at my Grapevine home?

Yes. We carry full general liability and workers' compensation insurance. Before we start any job, we'll provide proof of insurance. If you're having work done by any contractor, ask for the same proof and verify the coverage with the insurer. It's your property and your protection.

Summer electricity bills in Grapevine are brutal. When is the best time to get spray foam insulation done?

The best time is spring or fall, when temperatures are moderate and the cure window is easier to manage. Summer is possible but harder because the attic is already 140 to 160 degrees, and the cure takes longer. Winter works too, but a cold snap can slow the cure and complicate the re-entry window. If your electricity bill is already out of control, spring is your window. Call us at (817) 607-8986 and we'll fit you into the schedule and explain what you'll save once the foam is in place.